Pro-Seal 6006 is a flexible, two-component traffic detector loop sealant designed to seal loops in both asphalt and concrete pavements. Pro-Seal 6006 encapsulates, insulates and protects the loop wire from moisture penetration and damage from road debris. Pro-Seal 6006 does not shrink, which eliminates refilling call-backs.
Whether you need to seal a small loop at a parking gate or hundreds of loops for a big traffic signal project, Pro-Seal 6006 is up to the task. Literally millions of linear feel of loop slot has been successfully sealed with Pro-Seal 6006.
Pro-Seal 6006 is a pour-able, self-leveling sealant that is applied without the need for expensive pump systems or cumbersome caulking guns that breakdown and are a maintenance headache.
Application is simple. Pop the lid off the gallon can, add 1-2 tubes of catalyst and mix using a drill and paint mixer. Pro-Seal 6006 is dark brown in color, the catalyst is dark red. Simply mix until you have a uniform color with no visible streaks of red catalyst, usually about 30 seconds. Once mixed Pro-Seal 6006 can be poured right from the gallon can or any other suitable container. Smooth sealant into the loop slot with a V-shaped squeegee. See mixing instruction for more details and pictures.
Pro-Seal 6006 Advantages:
Easy to use, requires no special equipment for application, just mix and pour
- Self leveling/Pours easily
- Totally encapsulates the loop wire
- Rapid cure, allows traffic lanes to be opened faster with no pick-up or tracking on vehicle tires.
- Bonds to all road surfaces
- Flexible, resist cracking caused by expansion and contraction due to temperature changes and vehicular traffic.
- Resistant to most chemicals and solvents (Oil, Gasoline, Brake Fluid, road salts, Jet Fuel)
- Available in 1 gallon cans, 5 gallon pails and 55 gallon drums.
Click Here for complete Pro-Seal 6006 brochure (Pdf)
Pro-Seal Speed Set
Pro Seal 55 Gallon Drum
© 2005 RAI Products 1-888-776-7325
Developed & Designed by Metheney Consulting, Inc.
